Everyday Home Projects
1X6 CEDAR OR PINE, 5 FTA12"B7"C8"CD4"E9"5-1/2"HATCHED = OFFCUT 1X6 CEDAR OR PINE, 5 FTA12"B7"C8"CD4"E9"5-1/2"HATCHED = OFFCUT · WIDTHS 3×
  1. General notes
  2. All dimensions in inches
  3. Entrance hole 1-1/8 diameter
  4. Side tops slope from 8 to 7
  5. No glue on the floor
Drawn for
Everyday Home Projects
Free plan
Nº 06
Title

Birdhouse

For wrens and chickadees, from one 5 ft board
Level
Beginner
Time
2 hours
Drawn by
James
Sheet
1 of 2

Sheet 2 · The build

A simple nest box sized for wrens and chickadees, cut from one 1x6. The roof slopes forward to shed rain, and the floor comes out with two screws so you can clean it each year.

The finished cedar birdhouse with a sloped roof and a round entrance hole, mounted on a fence post in a garden
What you're building: the finished birdhouse.

Tools

  • Saw and speed square
  • Drill with a 1-1/8" spade bit and a 1/4" bit
  • Countersink bit
  • Tape measure, pencil, sandpaper

Materials

  • One 1x6 board, 5 ft (cedar, or untreated pine)
  • About 20 exterior screws, 1-5/8"
  • Waterproof wood glue
  • 2 screws, 2-1/2" long, for mounting

Cut list

PartNameQtySize
Back13/4 × 5-1/2 × 12
Front13/4 × 5-1/2 × 7
Side23/4 × 5-1/2 × 8
Floor13/4 × 5-1/2 × 4
Roof13/4 × 5-1/2 × 9

Sizes in inches: thickness × width × length

Steps

Shop note

Skip the perch. Wrens and chickadees don't need one, and it gives predators something to hold on to.

Resources I recommend

These are affiliate links. If you buy through them I may earn a commission, at no extra cost to you. The free plans stay free either way.